Firstly, you should install the board on the mobile stand or mount it to a wall. Please see the relevant document for how to do this. Then, you connect your TouchIT Board via the USB cable to your PC. Plug in your projector to your computer,toggle the display and you are ready to calibrate. Please [...]
You can use any projector with the TouchIT Board, however for optimum performance in all light conditions, and to minimise the glare and hotspots, we recommend that you use projector with a brightness of no more than 2000 lumens.
You should firstly check to see if it is installed. The installation does put a green hand icon on the desktop.
You should follow this simple set of instructions. Firstly, make sure that the USB cable is connected, for testing you should only use the cable that came with the board, no extensions. Check that the server is installed and running (the green hand on your desktop and in the system tray) This should turn green [...]
Firstly, check that you have connected both ends of the USB cable, one to the computer and second to the TouchIT Board. You should then check the the server is running, if it is there will be a green hand in the system tray of your computer (by the clock) This should be flashing red [...]
There is a stand available for all sizes of board. Please contact your local reseller for information and pricing.
At time of writing (July 2010) there is not a 16:10 TouchIT Board. Depending on demand for this from the worldwide markets, we may choose to develop this size in the future.
The easiest way to tell whether your board is no glare or low glare is to run your fungers on the surface. If the surface is smooth, then you have a low glare board. If the surface is a little bit rough to touch, you have a no glare surface.
The easiest way to tell is from your serial number. If you have a board that has a serial number of less than 400 then you have a driver version of the board. If you have a serial number that is 400 or greater then you have a HID board.
With the current version of the server application, you do not have to recalibrate when you close the server or indeed restart you machine. If this is happening, you need to update the version of the server that you are using. You should visit Downloads